Magellan 702211 Bike Mounting Bracket Reviews

• Look Out!

  
  By ANP2IQPAW3RSF on 2006-07-10
  I am a mountain biker and loved the idea of being able to view the screen while riding. BUT the mounting bracket does not hold the explorist well enough. I watched my explorist unit fall to the ground on the first ride and thought I just didn't have it clicked into place. Wrong, because after putting it firmly into the bracket I lost the unit on the next downhill. I was luck enough to find the unit but will never use it on my bike or ATV due to fear of losing it.
  
  

• Magellan Explorist Bike Mount

  
  By A3EBSITF6YF853 on 2006-03-13
  The mount works well. I read elsewhere that people added velcro to make the mount more secure. I find that if you make sure the little plastic tab on the mount snaps into the small hole on the GPS, usually with an audible click, the mount is very secure. However, I must admit, I don't do the roughest biking (jumping over logs etc.). I would have given it five stars, but a have had a little trouble with is trying to rotate on the handle bars. I kept having to tighten it up. Seems firm now however.
  
  

• Great for the ATV

  
  By AV7QF02OJHR0N on 2006-02-24
  So far so good with this mount. I mounted it to the bars of my ATV and it works great. Easy to see and operate right where it is. It's hard to read while moving do to vibration but that is to be expexted. I havent really put it through an extreme test but it holds very well for what we have done.
  
  

• Good bracket but could be more bike friendly.

  
  By A1M2PUEJTFPWD4 on 2006-06-06
  This bracket holds my GPS very well. The only thing I really don't like about it is the mount to the handlebars. This is obviously just a bracket designed to be used with a car mount and the bike handlebar mount is not the type that you would see with any other bike accessory. It does not allow easy switching between bikes; it requires unscrewing two screws. It suggests using the included adhesive strip to wrap around the handlebar. I didn't use it and isn't needed; I just used the rubber strip with the paper backing still in place. If it had a mount more like any bike headlight that has a well designed mount that allows easy switching between bikes it would be a much better product. The metal bracket with the two long screws even looks like a cheap afterthought. I will probably modify it to work better with bikes. However the device does at least hold the GPS unit securely.
  
  

• Good but be careful

  
  By A12MK99P4243HS on 2006-03-09
  Does the job but my explorist GPS has the tendency to pop out when riding over bumps. So I have to secure the GPS unit with a strap.
  
  
• Does not fit Explorist XL
  By A1OXWECK8P3IWU on 2006-08-05
  Title says it all. Returned it. There was not caveat with respect to the XL although did come across some other sites that highlighted the fact.
  
  
• Works
  By A35EHEKSCDTRD9 on 2007-04-15
  You have to screw the screws in really tight here, or else it will keep coming loose. I nearly declared this product defective, but I just didn't have the screws in tight enough.
  
  
• Clumsy but effective
  By A2Q1KZOVYCFFMA on 2007-10-02
  Clunky design. If you're not careful, the GPS doesn't click securely into the bracket. Your first warning that it isn't seated is the crash of the GPS unit onto the pavement. The mounting screws come without lock-nuts, and they loosen, letting the bracket rotate out of place. Switching the bracket from bike to bike is a real pain. And that price! For half the suggested price of this bracket, you can buy a high-powered, long-life bike headlight with a GREAT mounting system. Since there's no competiting product -- and the bracket does work if you put lock-nuts on the screws and pay very close attention to snapping the GPS unit in securely -- I'm recommending this product for those who need it. However, if TomTom or Garmin comes up with a better bike-mounting bracket, it will be the deciding factor when I select my next GPS.
  
  
• Poor design for mountain bikes
  By A355UNWCX7R9J1 on 2008-02-10
  This mounting bracket has a number of shortcomings that make it difficult to recommend. First, mountain bikes typically have handlebars that are wide at the stem and taper and bend towards the grips. If you have a mountain bike there is a good chance the bracket will not fit your handlebars well. Second, if it does fit, the weight of the eXplorist will cause the bracket to twist as you ride unless you really tighten it. This is especially bad if you have a carbon bar. You may be able to mount the bracket close to the stem so that it also rests against it for support. This will keep it from rotating while riding.
  
  If Magellan had made the metal parts of the bracket so that it could be rotated by 90 degrees it could be mounted on the stem. This is a far more stable area for something heavy. Unfortunately this is not the case. As another reviewer mentioned, most bicycle lights have better mounting designs.
  
  
• Works Great!
  By A17M6JOOMWKYMD on 2008-09-18
  I attached this mount to the handlebars of my Honda XR350R and it works great! The GPS unit is held securly and I have no problems with it moving around. Gone over 100 miles off-road so far with no problems!
  
  

• Magellan eXplorist Carrying Case with Belt Clip
• Magellan eXplorist Vehicle Mounting Bracket
• Magellan USA 3-D Mapsend Topo Software
• Battery for The Magellan eXplorist 500 - Super Extended Life
• Magellan eXplorist Swivel Mounting Bracket