Mighty Putty MP-1001 Fix, Fill & Seal Expoxy Bond. Supports up to 350 Pounds. Set of Six. Reviews

• Don't believe it!

  
  By A39MK36O8KZZ72 on 2008-05-26
  I bought this product for one specific purpose, to attach wires and brackets to a brick wall for vine and trellis support. In the video presentation for this product it shows attaching shelving brackets to a brick wall and it supports 350 lbs. Reality, it supports nothing! After curing for over 24 hours, the slightest pressure causes immediate failure of the bond. This may be good for temporary filling of holes, but in no way will replace a two-part liquid epoxy or a product like JB Weld.
  
  

• mighty putty- not so mighty

  
  By A36H3YIRM1T3JZ on 2008-05-27
  This stuff sucks. at first i tried it on a picture frame (the one with lots of frames stuck together, from walmart) thought it worked, so i went and tried to put a garden hose holder on to our brick wall, - no garden hose attached yet. it wouldnt even stick with me putting alot of pressure on it i stuck a heavy trash can against it hoping it would just need some time to bond. but nope hours later and the damn thing just fell off. oh and back to that picture frame its been sitting in a box for about a week now and i decided to hang it, and by the way the part that i fixed is not a part that has any pressure on it its the bottom of the frame, i placed ONE PICTURE IN THERE NO GLASS WOOD JUST THE PAPER AND IT FELL OFF. WASTE OF MONEY
  
  

• Mighty Putty

  
  By A3GNR44A9Z29KW on 2008-06-08
  I found this product does what it claims but it is really difficult to mix together. Maybe in the warmth of the summer it may prove to be softer and more pliable.
  
  

• Mighty Crappy IMHO

  
  By A38TD13X8RPY72 on 2008-08-21
  Like others here, I had seen the numeous commercials on this product and took a chance and purchased some ( Not from Amazon ) So far I used one tube of this product and have not been impressed at all.
  
  I tried it on a couple of projects around the house. I did manage to patch a crack in some plastic on a carpet cleaning machine. Being a bit of a home handyman, I frequently use various filler and repair products and found the so called Might Putty almost next to useless. Even after curing for several days, the patch I did on the plastic was not very hard - more the consistancy of a childs play dough when hardened and it did tend to crumble a bit. Nothing like any of the other epoxy type products I have used in the past which upon curing turn rock hard.
  
  A few days later, I tried the remaining half of the tube to use as a seal on a leaking plumbing fixture as I had seen this use on one of the commercials for this item. It should be noted no water was coming from it and I dried the fixture and cleaned up the surface prior to using the putty. I found in this case the putty would not even stick to the surface I was applying it to and it just fell off and onto the floor.
  
  Both times I used this product I followed the instructions quite closely especially the second time around after the poor performance of the first repair job. I did this to insure I had properly mixed the compounds.
  
  Bottom line is I found the product nothing like as advertised and about the only use I can see it for would be to patch small holes in a wall much like a drywall putty. Hoefully now stuck with 5 more sticks of this product I will find a few holes to patch... lol - Would I buy it again? Not likely as I found it pretty much a total waste of money.
  
  

• good stuff

  
  By A9O4TF8CSLP4W on 2008-04-05
  saw this idea on TV did not belive at first but works very well be on estamite
  
  
• OK for some things
  By A3SSZ3VPOMDIM8 on 2008-07-27
  I used it for a rusted hole in my above ground pool. It worked ok to seal and it is very hard. I glued a piece of wood together and it came apart. My son tried to bond some plastic on his car and it did not work so we used JB Weld.
  
  
• This is my second purchase first set lasted 2 yrs. A+++
  By AJQDIT55SZ3ZX on 2008-11-04
  I've seen the negative reviews on this and they puzzle me. I have used this for so many different things and been well pleased. They only negative I have had is I had it put up my outdoor flagpole and it held metal to brick for 2 years, then it fell off and I couldn't get it to stick again. I tend to think it must lose some power over time. But for the price it is still worth it.
  
  I have a plant hanger metal to brick it has kept up over two years and still rock strong outside.
  
  Give it a try what do you have to lose? Amazon has a great return policy. Also make sure you kneed it fully before use until it is uniform in color.
  
  
• Great Glue
  By A26QKZDKYURQB6 on 2008-08-17
  This stuff really works. I wish it dried a little faster, but you can't have it all.
  
  
• SAVE YOUR MONEY!!!!!!!!
  By A4D7Z57LZ7P9U on 2008-08-30
  I tried to fix two spots on my truck.It was plastic to metal.I followed the instructions and after two minutes of kneading it actually starts to feel warm.I hoped this would work,however after several failed attempts I have lost hope.
  
  
• NOT DISHWASHER SAFE
  By AT254KYO2W95N on 2008-09-20
  
  I repaired my favorite mug where the handle broke off. Used it several times without problems. Now I need to pay $1200 to repair the laptop screen the coffee damaged when the handle snapped off. It may be because I ran the mug through the dishwasher. They say it's waterproof, the instructions say nothing about the dishwasher. Maybe it just sucks and would have failed anyway. Wish I read reviews before buying this junk.
  
  

• Debbie Meyer Green Bags
• Hercules Hook Wall Hooks with Laser Marker 20-pk.
• Alden Grabit Broken Bolt and Damaged Screw Extractors, 4-Piece Set
• Xpress Seal Pro- Professional Caulking Kit for the Pro Caulk Look
• J-B Weld 8277 Water Weld